Apeks XTX100 1st Stage

SKU:
AP0362F#
£285.00
(No reviews yet) Write a Review
Current Stock:
Apeks XTX100 1st Stage

XTX100 Regulator

Sharing the same technical features with the higher end XTX200, the XTX100 first stage is machined from a solid piece of marine brass, but finished in luxurious satin chrome rather than the polished chrome or PVD of the more expensive models.

An optional 5th port is available which features the additional bonus of an integrated heat exchanger (available on the Tungsten, XTX200 and XTX100 first stages only).

Available in yoke or DIN configuration.

Suitable for coldwater use (below 10 C / 50 F).

Compatible with EAN40 out of the box.

First Stage:

  • Uses the FST type first stage.
  • Satin finish.
  • Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
  • 2 HP ports and 4 MP ports are angled for optimum hose routing.
  • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.
 
 
 
Connections Yoke and DIN available
Type of first stage Over-balanced diaphragm design, environmentally sealed
Body Type One piece forged body
Number of HP ports 2 (7/16" UNF)
Number of MP ports 4 with 5th port option (3/8" UNF)
Environmental Dry Kit Standard
First stage exterior Satin chrome over marine brass
Orientation Convertible LH or RH
Coldwater Use Yes
Nitrox compatible Yes to 40% O2 when new, out of the box / Can be cleaned to 100%
Weight Yoke 1322g / DIN 1192g